Sign In

DAYTON Turbine Pumps, 5 HP

Filter
Bearing Type: Sealed Ball Bearing (Motor Bearing) , Drain Plug: 180 From Inlet Port , Duty: Continuous , Frame: 56C , Height: 7.5" , Housing Material: Cast iron , HP: 5 , Impeller Material: Bronze , Impeller Type: Regenerative Turbine , Inlet: 1-1/4" , Inlet Pressure: 200 PSI , Length: 17.375" , Max. Case Pressure: 300 PSI , Max. Dia. Solids: 25 Microns , Max. Fluid Viscosity: 250 SSU , Max. Pressure: 300 psi , Max. Specific Gravity: 1.00 SP , Motor Enclosure: TEFC , NEMA/IEC Frame: 56C , Outlet: 1" , Phase: 3 , Port Rotation: 90 Increments , Screw Material: Steel , Seal Application: Low Flow, High Head , Seal Material: Carbon, Ceramic, Buna , Seal Type: Type 21 , Voltage: 208-230/460 , Volute Material: Cast-Iron, Bronze Fitted , Width: 8.12"
StyleModelBest Efficiency GPM @ HeadBest Efficiency Range GPM @ HeadConstructionGPM @ 20 PSIMax. Liquid Temp.Motor TypeWetted MaterialsPrice
A
4UP61
18.0 GPM @ 120 PSI11.2-21.5 GPM @ 240-32 Ft.Bronze Impeller, Buna N O-Ring Gaskets, Mechanical Seal with Buna N and Stainless Steel Parts and Carbon/Ceramic Seats, Cast Iron Cover and Motor Bracket with Hard Electroless Nickel Plating and Replaceable Bronze Shaft Sleeve22.0-20 to 230 F3-Phase, TEFCCast Iron, Bronze Fitted£4,351.32
A
4UP65
32.8 GPM @ 120 PSI33.0-37.5 GPM @ 117-63 Ft.Bronze Impeller, Buna N O-Ring Gaskets, Mechanical Seal with Buna N and Stainless Steel Parts and Carbon/Ceramic Seats40.6230 F3-PhaseCI,Bronze,Carbon,Ceramic,Buna N£4,041.74

Turbine Pumps, 5 HP

Dayton 5 hp turbine pumps are used in reverse osmosis filtration, water treatment plants, spray equipment, boiler feeds and liquid transfer applications. These turbine pumps are integrated with sealed ball bearings for low rotational friction and preventing lubricant leakage. They deliver flow rates up to 40.6 gpm at 20 psi and are capable of withstanding liquid temperatures ranging from -20 to 230 degrees F.

We are here to help!

Looking for a part not listed here?