Sign In

DAYTON Convertible Jet Pumps

Filter
Bearing Type: Permanently Lubricated Ball , Compliance: CSA-US , Duty: Continuous , Frame: 56J , GPM @ 20 PSI: 55 , Housing Material: Cast iron , Hz: 60 , Impeller Material: Brass , Impeller Type: Closed , Max. Pressure: 40 psi , Motor Enclosure: ODP , Motor RPM: 3450 , Motor Type: Capacitor Start , Outlet: 1" NPT , Phase: 3 , Seal Material: Stainless Steel, Buna, Carbon/Silicon Carbide , Seal Type: Mechanical , Stages: 1 , Type: High-Volume , Voltage: 115/230 , Wetted Materials: Brass, Cast Iron, Stainless Steel, Buna N, Carbon, Ceramic
StyleModelMax. Inlet PressureAmpsHeightSuction LiftWidthHPInletLengthPrice
A
4HEZ6
75 PSI17.0/8.512"100 Ft.12"11-1/4" NPT19"£970.89
A
4HEZ5
75 PSI10.8/5.512"80 Ft.12"3/41-1/4" NPT18"£814.79
A
4HEZ7
75 PSI19.0/9.512"110 Ft.12"1.51-1/4" NPT19"£1,027.89
A
4HEZ4
75 PSI10.0/4.812"60 Ft.12"1/21-1/4" NPT18"£816.50
B
5UXK3
123 PSI10.8/5.58"90 Ft.9 1/8"1/21 1/4" NPT14 13/16"£717.06
B
5UXK5
123 PSI20/10.58.687"140 Ft.9.812"11 1/4" NPT16.687"£869.66
B
5UXK4
123 PSI18/98.687"110 Ft.9.812"3/41 1/4" NPT16.687"£903.59
B
5UXK6
123 PSI21.5/118.687"140 Ft.9.812"1.51 1/4" NPT17.5"£1,029.54

Convertible Jet Pumps

Dayton convertible jet pumps are used in deep or shallow wells to provide water supply without a municipal water source. They are attached to an ejector, tank and a control panel to instinctively supply water when required. These jet pumps are usually mounted above ground for maintenance and repair in comparison to submersible well pumps that are placed in the well and required to be removed from the well for examination. Choose from a range of these convertible jet pumps, available in 8, 8.687 and 12-inch heights.

We are here to help!

Looking for a part not listed here?