Base Plate Bollard
Calpipe Security Bollards offers crowd control supplies and barriers to keep order at municipal services, events, shops or places with heavy foot traffic. Bollards are visual deterrents to both pedestrian and vehicular traffic in high security, industrial, commercial and retail environments. These security planters come with 4 mounting holes to ensure effortless installation and feature stainless steel / carbon steel construction for structural rigidity and resisting corrosion on exposed surfaces. Calpipe Security base plate bollards are supplied with dome or flat caps for easy cleaning and are available in heights of 36 and 48 inches on Raptor Supplies.
Uses
Calpipe Security base plate bollards offer a wide combination of features, making them useful for malls, hospitals, parking lots, educational institutions, financial institutions, chemical plants, water treatment plants, retail facilities, entrances & stadiums, as well as the military and government sectors.
Working Mechanism
Calpipe Security base plate bollards are short posts designed for creating a protective or architectural perimeter. They are available in a broad variety of styles and shapes to accentuate or visually stand out in their settings. They guide traffic and mark boundaries, as well as physically block vehicle incursion in order to protect property and people.
Frequently Asked Questions
What is the difference between stainless steel and polished stainless steel?
A well polished stainless steel surface provides better corrosion resistance than a roughly or badly polished surface, proving ideal in harsh working environments, including nuclear or offshore industries. All stainless steel finished products perform better when cleaned and maintained properly.
What are retractable bollards?
Retractable bollards, when extended, offer a clean and sleek perimeter edge that manages and guides traffic. Tthese units, when unlocked, neatly telescope down into in-ground receivers and sit flush with the ground, preventing obstructions or tripping hazards.
How far apart should you place bollards?
It is recommended that bollards engineered to control traffic flow should be spaced 3 to 5 feet apart in order to block the minimum width of a vehicle, thus satisfying the accessibility requirements.
How deep should bollards be placed?
The hole dug for a bollard must be 18 to 24 inches deep and have a 6 inch gap all around, to firmly set in concrete.
How much force can a bollard take?
A bollard can withstand an impact load of 10000 pounds of vehicles travelling at a maximum speed of 5 mph.
What is #4 finish on stainless steel?
Stainless steel with #4 finish results in uniform and directional appearance. It is accomplished by mechanically polishing the metal with fine abrasive belts to eliminate minute amounts of metal from the surface.
Who owns Calpipe Security Bollards?
Calpipe Security Bollards is a part of Atkore International, a manufacturer of steel tubes, cables and pipes.
