Electromagnetic Lock Power Supplies

Altronix AL125UL Series access control power supply chargers are used to convert 115VAC, 50 / 60Hz input into 2 individually PTC protected 12VDC & 24VDC outputs. They are suitable for applications that require an interface with fire alarm control panels. The built-in charger houses gel or sealed lead acid batteries and facilitates automatic switching over to the stand-by battery in case of AC failure. These power supply chargers can be operated at temperatures ranging from 0 to 49 degrees C.

Altronix offers offline power supply / chargers to convert a 115VAC, 50 / 60Hz input into a 12 or 24VDC output, continuous supply current. They provide filtered & electronically regulated output and automatically switch over to stand-by battery when AC fails. These units can limit overload and short circuit currents and are integrated with LED indicators to show AC input & DC output.

Altronix power supplies / chargers are designed for converting input power signals into PTC protected outputs. They feature steel / phenolic / fibreglass construction for mechanical strength and corrosion resistance. The built-in charger has gel or sealed lead acid batteries and provides thermal overload & short circuit protection. These power supplies / chargers are capable of being operated at temperatures ranging from 0 to 49 degrees C and are available in grey & red finish variants.

Altronix siren drivers are used with alarm panels having limited current capacities. These siren drivers feature steady or yelp channel operation to deliver high output while consuming very low current draw. They offer relative humidity up to 85% (+/- 5%) and can be operated at temperatures ranging from - 13 to 131 degrees F. These siren drivers feature phenolic / fibreglass construction for high mechanical strength & corrosion resistance, and are available in lengths of 1.75 & 2.75 inches.

Altronix eBridge IP over coax receivers transmit data & power over coax cables and facilitate system upgrades from analogue to IP devices or cameras by utilising existing legacy coax. They eliminate the labour & costs during the installation of a new network cable and enable power & data transmission extended over 500 meters. Further, these CE-approved & UL-listed receivers extend network link distances in industrial environments and upgrade deployed CCTV coax to digital networks for airports, hospitals, schools & casinos, working along with megapixel, HD1080 & HD720 cameras. They feature RJ45 type ethernet connectivity for compatibility & additional protection in harsh environments and LED indicators to indicate the proper point-to-point functioning of the devices. Additionally, these C-Tick compliant devices are equipped with type 16 channels, allowing them to have 16 cameras on one system and the throughputs are rated to pass up to 25 Mbps over long distances. Choose from a wide range of these devices with operating temperatures ranging from 14 degrees Fahrenheit to 122 degrees Fahrenheit, available in 1 & 16 output variants.

Altronix NAC power extenders / supplies are cost-effective, voltage regulated, remote power extenders for notification appliance, circuit expansions and provide auxiliary power to support system accessories. They feature steel construction to reduce oxidation on the exposed surfaces and can connect to any 24V volt fire alarm control panel (FACP). These CE-approved extenders have 2-wire sync modes, allowing audible notification appliances (horns) and visual notification appliances (strobes) to be silenced or deactivated simultaneously. Additionally, they offer ground fall detections for preventing damage to the electrical components and the signal circuit, trouble memories help identify intermittent loop problems. These power supply devices utilise sealed, lead acid or gel type back up batteries for excellent heat conduction and the common trouble inputs or outputs for external, trouble signal tie-ins. These LED indicators turn on / off while carrying electricity and are available in 6, 8 & 10A output current ratings.

Altronix off-line power supplies / chargers are designed for applications requiring additional power, such as security systems and access controls. These power supplies / chargers feature phenolic / fibreglass construction for mechanical strength & corrosion resistance. They are equipped with a built-in charger for gel or sealed lead acid batteries and provide thermal overload & short circuit protection. These power supplies / chargers offer relative humidity up to 85% (+/- 5%).

Altronix UTP passive transceiver hubs are used to transfer UTP video, power and data over a single CAT-5 or high structured cable for high speed transmission. They provide 8 camera channels in space saving, wall or rack mount enclosures with video transmissions up to 750 feet per channel. These devices feature individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression to resist increasing temperatures. The optional HubSat4D Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory module to transmit video from 4 cameras at a time over a single CAT-5 or high structured cable and provide power to minimise the possibility of voltage drops, associated with long cable runs.

Altronix WayPoint outdoor power supplies provide voltages distributed via two, Class 2 rated, PTC protected, power-limited outputs to power heaters, CCTV cameras and other video accessories. They feature fiberglass reinforced polyester construction to reduce environmental impacts and have individual power output LED indicators for proper point-to-point functioning. These power supplies are further equipped with illuminated master power switches to transfer the loads and are available in 24VDC & 28VAC voltage outputs.

Altronix power supply chargers are used for powering, installing and repairing electromagnetic door locks. The built-in charger houses gel or sealed lead acid batteries and delivers relative humidity up to 85% (+/- 5%). These supplies or chargers can be operated at temperatures ranging from 32 to 120 degrees F and are coated with grey finish for resisting corrosion on exposed surfaces.

Altronix offers power supply units to provide power via 4 protected outputs for CCTV cameras, heaters and video accessories. These CCTV power supplies come with three Class 2 rated power limited outputs that are PTC protected to offer resettable overcurrent protection. These units feature a NEMA 4 rated enclosure for outdoor use. These units are integrated with an illuminated master power function to disconnect the circuit breaker with a simple manual reset.

Altronix multi-output power supply chargers convert 115V AC, 60 Hz input into four, 12VDC or 24VDC, Class 2, power outputs. They feature filtered & electronically regulated outputs for a smooth DC power supply and provide protection from short circuits & thermal overloads. These devices offer automatic switch overs to stand-by batteries during AC failures and have built-in chargers for sealed, lead acids or gel type batteries. The visual relay indicators prevent overvoltage & overcurrent faults. They provide low battery supervisions through form C contacts to trigger reporting or signaling devices. Choose from a broad range of these chargers having operating temperatures ranging from 0 degree to 49 degrees Celsius.

Altronix access power distribution modules with power supplies / chargers are used for powering, installing & repairing access control systems and accessories. These multi-output power supplies can be operated in both Fail-Secure & Fail-Safe modes for adjustable voltage output. These controllers provide thermal overload & short circuit protection and can house gel or sealed lead acid batteries in the built-in charger. They deliver relative humidity up to 85% (+/- 5%) and are available in enclosure widths of 12 & 13 inches.

Altronix power supplies with 8 PTC outputs convert 115VAC, 60Hz inputs into eight independently controlled 12VDC or 24VDC, non-power limited fuse protected outputs. These outputs operate in both fail-safe and fail-secure outputs with up to 10A continuous supply current. The fire alarm disconnects enable emergency egress, alarm monitoring & triggering other auxiliary devices in the events where the fire alarm systems are activated and are individually selectable for any or all of the eight outputs. The power supplies catalogue also includes Vertiline rack mount, DC power supplies providing eight filtered & electronically regulated power outputs in space-saving, rank mount chassis. These rack mounts offer illuminated, master power disconnect circuit breakers with manual reset switches for default settings and removable terminal blocks with locking screw flanges to secure the wires. Choose from a wide range of these power supply devices, available in grey and black finishes.

Altronix power supply chargers / boards convert 115VAC, 60 Hz input into single 12VDC non power-limited voltage outputs. They feature phenolic or fibreglass construction, ensuring excellent electrical insulation and filtered & electronically regulated outputs for a smooth DC power supply. These boards protect from short circuits & thermal overloads and have built-in chargers for sealed, lead acids or gel type batteries. They offer automatic switch overs to stand-by batteries during AC failures and zero voltage drops when switched over to battery backup. Choose from a wide range of these power supply boards with operating temperatures ranging from 0 degree to 49 degrees Celsius and are available in 12VDC & 24VDC voltage outputs.

Altronix Strikeit panic device controllers operate up to two, 24VDC panic hardware devices simultaneously, as well as handle the demand of high current, surge panic hardware, locking devices. They feature steel construction to withstand corrosion and have un-switched auxiliary voltage outputs for powering keypads, card readers, REX PIRs, relays & electronic timers. Further, these controllers are equipped with LED status, visual indicators to monitor AC power, FACP (fire alarm control panels) status and for lockout wiring supervisions. They come with built-in chargers and sealed, lead acid or gel type batteries. They can automatically switch over to stand-by batteries for up to 30 minutes during AC failures. The brand's Strikeit1 Panic Device Controller includes follower relays for each output to trigger external relays and can control automatic door operators that are locked or unlocked during the working days. Additionally, they have configurable, FACP interfaces to either provide or remove power to the lock outputs when activated and the intelligence logic ensures protection against accidental shorting of lock outputs.

Altronix sensitive relay modules are ideal for continuous duty operations in handling switching applications. They feature phenolic material to withstand humidity & high temperatures or have fiberglass construction, providing electrical insulation with chemical resistance. Choose from a wide range of these modules, operating on temperatures ranging from -25 degrees Celsius to 55 degrees Celsius and are available in widths of 1.9 & 2.75 inches.