Sign In

ALLPAX Metric Hollow Punch Cutting Heads

Allpax metric hollow punch cutting heads include Allpax AX1360, AX1361, AX1362 & AX1370 models. They puncture a surface to create a hole in fluid transfer applications.

Filter
Material: Hardened Steel , Number of Pieces: 1
StyleModelDiameterHeightSystem of measurementPrice
A
AX1381
2mm1.5"Imperial/Metric£90.83
B
AX1360
2mm0.6"Imperial/Metric£44.60
C
AX1361
3mm0.6"Imperial/Metric£44.60
D
AX1362
4mm0.6"Imperial/Metric£44.60
E
AX1363
5mm0.6"Imperial/Metric£44.60
F
AX1364
6mm0.6"Imperial/Metric£44.60
G
AX1365
7mm0.6"Imperial/Metric£44.60
H
AX1366
8mm0.6"Imperial/Metric£44.60
I
AX1367
9mm0.6"Imperial/Metric£44.60
J
AX1368
10mm0.6"Imperial/Metric£44.60
K
AX1369
12mm1"Imperial/Metric£53.35
L
AX1370
14mm1"Imperial/Metric£53.35
M
AX1371
16mm1"Imperial/Metric£53.35
N
AX1372
18mm1"Imperial/Metric£53.35
O
AX1373
20mm1"Imperial/Metric£72.83
P
AX1374
22mm1.3"Imperial/Metric£72.83
Q
AX1375
24mm1.3"Imperial/Metric£72.83
R
AX1376
26mm1.3"Imperial/Metric£72.83
S
AX1377
28mm1.3"Imperial/Metric£72.83
T
AX1378
30mm1.3"Imperial/Metric£72.83
U
AX1379
32mm1.5"Imperial/Metric£72.83
V
AX1380
34mm1.5"Imperial/Metric£90.83
W
AX1382
38mm1.5"Imperial/Metric£90.83
X
AX1383
40mm1.5"Imperial/Metric£90.83
Y
AX1384
42mm1.7"Imperial/Metric£108.31
Z
AX1385
44mm1.7"Imperial/Metric£108.31
A1
AX1386
46mm1.7"Imperial/Metric£108.31
B1
AX1387
48mm1.7"Imperial/Metric£108.31
C1
AX1388
50mm1.7"Imperial/Metric£108.31

Features

  • Allpax metric hollow punches are used for creating quick & precise punching holes in flanged gaskets.
  • These replacement hollow punch cutting heads have a unique design that is capable of punching both single-diameter holes (boltholes) and dual-diameter rings (washers) in a single operation.
  • These hollow cutting heads are made of hardened steel that stays sharp for utmost performance.
  • The patented locking system facilitates rapid interchange of cutting heads.
  • They are mounted on an Allpax handle and positioned on gasket material before striking with an Allpax hammer or mallet.
  • Allpax metric hollow punches have cutting heads with diameters ranging from 2 mm to 50 mm.

Frequently Asked Questions

What is the difference between a hollow punch and an arc punch?

A hollow punch is used to create precise punching holes in flanged gaskets such as sheet metal or leather, whereas, an arch punch is a sharpened circular tube punch basically used for leatherworking applications. Both these punches perform almost the same functions and have sharp & fine cutting edges for cutting through gasket materials easily, along with removing stubborn nails, bolts & pins.

What is the difference between a dovetail punch and a hollow punch?

Dovetail punches are ideal for fabricating interlocked dovetail joints when the outside diameter of the gasket is larger than the width of the material to be cut. These units feature a padded rubber grip to offer maximum comfort during continuous operations. Hollow punches, on the other hand, are ideal for creating single-diameter holes (bolt holes) and dual-diameter rings (washers) in a single operation. They allow quick & precise hole-punching on flange gaskets.

We are here to help!

Looking for a part not listed here?