Tap Bolts | Raptor Supplies United Kingdom

Tap Bolts

Filter

Tap bolts are used for repairing automotive equipment and attaching motors to machines & pulleys for adjusting the belt tension. They are employed in tapped and drilled holes instead of studs and nuts.

EATON -

Tap Bolt

ModelItemPrice (inc. VAT)
911-5672ZBJ7AZP£16.23
See Details

Tap Bolts

Tap bolts are used for repairing automotive equipment and attaching motors to machines & pulleys for adjusting the belt tension. They are employed in tapped and drilled holes instead of studs and nuts.

Frequently Asked Questions

What are hex bolts?

Hex bolts are bolts with external threading and a hex head. They are designed to be driven by a wrench. Hex bolts may be partly threaded or completely threaded, and are available in hex cap & hex tap variants. They are inserted into holes with machined & tapped threads, and are available in coarse thread (UNC) and fine thread (UNF) options.

What is the difference between a cap screw and a bolt?

The most fundamental distinction between a cap screw and a bolt is how these fasteners are installed. A bolt is installed by turning a nut to tighten the fastener, whereas a cap screw is assembled and tightened by turning the head of the bolt.

What do we call a bolt without a head?

Double-ended bolts, also known as stud bolts, have a threaded portion on each end of the bolt rather than a traditional head. One end is threaded to fit into a suitable hole that has been tapped with a mated thread, while the other protrudes and is threaded to hold a nut.

What do we call a screw without a point?

Machine screws do not have a pointed edge and are designed to be used in holes that are already tapped or have a nut. They are threaded all the way through the shaft.

We are here to help!

Looking for a part not listed here?