Spherical Washers | Raptor Supplies United Kingdom
sales@raptorsupplies.co.uk WhatsApp 0203 287 5224

Spherical Washers

Filter

Spherical washers are designed for creating a parallel plane between the bolt head and the face of the nut. Raptor Supplies offers spherical washers from Grainger. They are also known as levelling washers and are ideal for die & fixturing applications.

APPROVED VENDOR -

Spherical Washer

APPROVED VENDOR Z9458SETA
APPROVED VENDOR Z9470SETB
APPROVED VENDOR Z9488SETC
APPROVED VENDOR Z9484SETD
APPROVED VENDOR Z9536SETE
APPROVED VENDOR Z9466SETF
APPROVED VENDOR Z9478SETG
APPROVED VENDOR Z9462SETH
APPROVED VENDOR Z9454SETI
APPROVED VENDOR Z9450SETJ
APPROVED VENDOR Z9474SETK
APPROVED VENDOR Z9531SETL
APPROVED VENDOR Z9527SETM
StyleModelFinishFits Bolt SizesMaterialOutside Dia.RadiusRockwell HardnessThicknessThickness TolerancePrice (inc. VAT)
AZ9458SETBlack Oxide1/2"Low Carbon Steel1.125"1.5"B495/16"+/-0.010"£15.74
BZ9470SETBlack Oxide7/8"Low Carbon Steel1.75"2.5"B493/8"+/-0.010"£25.37
CZ9488SETBlack Oxide1.5"Low Carbon Steel2.875"3"B491/2"+/-0.010"£39.70
DZ9484SETBlack Oxide1.25"Low Carbon Steel2.5"3"B491/2"+/-0.010"£31.49
EZ9536SETBlack OxideM30Steel56mm41mmB6819.2mm+/-0.2mm£128.89
EZ9532SETBlack OxideM20Steel36mm27mmB6811.7mm+/-0.2mm£36.55
EZ9530SETBlack OxideM16Steel30mm22mmB689.6mm+/-0.2mm£28.73
EZ9522SETBlack OxideM8Steel17mm12mmB685.6mm+/-0.2mm£9.77
FZ9466SETBlack Oxide3/4"Low Carbon Steel1.625"2.25"B493/8"+/-0.010"£19.75
GZ9478SETBlack Oxide1.125"Low Carbon Steel2.25"3"B491/2"+/-0.010"£23.18
EZ9520SETBlack OxideM6Steel12 mm9mmB684.2mm+/-0.2mm£9.06
HZ9462SETBlack Oxide5/8"Low Carbon Steel1.375"1.75"B495/16"+/-0.010"£17.19
IZ9454SETBlack Oxide3/8"Low Carbon Steel7/8"1.25"B491/4"+/-0.010"£25.86
JZ9450SETBlack Oxide1/4"Low Carbon Steel5/8"3/4"B493/16"+/-0.010"£23.18
KZ9474SETBlack Oxide1"Low Carbon Steel2"2.75"B491/2"+/-0.010"£33.14
EZ9526SETBlack OxideM12Steel24mm17mmB688mm+/-0.2mm£15.74
EZ9524SETBlack OxideM10Steel21mm15mmB686.5mm+/-0.2mm£13.22
EZ9534SETBlack OxideM24Steel44mm32mmB6815.2mm+/-0.2mm£64.58
EZ9521SETPlainM618-8 Stainless Steel12 mm9mmB83 to B954.2mm+/-0.2mm£27.53
EZ9537SETPlainM3018-8 Stainless Steel56mm41mmB83 to B9519.2mm+/-0.2mm£205.71
EZ9523SETPlainM818-8 Stainless Steel17mm12mmB83 to B955.6mm+/-0.2mm£39.47
EZ9525SETPlainM1018-8 Stainless Steel21mm15mmB83 to B956.5mm+/-0.2mm£50.07
EZ9535SETPlainM2418-8 Stainless Steel44mm32mmB83 to B9515.2mm+/-0.2mm£165.09
LZ9531SETPlainM1618-8 Stainless Steel30mm22mmB83 to B959.6mm+/-0.2mm£99.30
MZ9527SETPlainM1218-8 Stainless Steel24mm17mmB83 to B958mm+/-0.2mm£61.45
See more
GRAINGER -

Stainless Steel Spherical Washers

GRAINGER Z9458SETSSA
GRAINGER Z9470SETSSB
GRAINGER Z9462SETSSC
GRAINGER Z9466SETSSD
GRAINGER Z9484SETSSE
GRAINGER Z9478SETSSF
GRAINGER Z9488SETSSG
GRAINGER Z9474SETSSH
GRAINGER Z9450SETSSI
GRAINGER Z9454SETSSJ
StyleModelOutside Dia.RadiusThicknessPrice (inc. VAT)
AZ9458SETSS1 1/8"1 1/2"5/16"£45.50
BZ9470SETSS1 3/4"2 1/2"3/8"£45.23
CZ9462SETSS1 3/8"1 3/4"5/16"£52.85
DZ9466SETSS1 5/8"2 1/4"3/8"£75.52
EZ9484SETSS2 1/2"3 in1/2"£125.57
FZ9478SETSS2 1/4"3 in1/2"£100.99
GZ9488SETSS2 7/8"3 in1/2"£164.58
HZ9474SETSS2 in2 3/4"1/2"£66.30
IZ9450SETSS5/8"3/4"3/16"£26.26
JZ9454SETSS7/8"1 1/4"1/4"£33.68

Spherical Washers

Spherical washers are designed for creating a parallel plane between the bolt head and the face of the nut. Raptor Supplies offers spherical washers from Grainger. They are also known as levelling washers and are ideal for die & fixturing applications.

Frequently Asked Questions

How much angular deviation can spherical washers compensate?

All-spherical, two-piece washers automatically adjust under compression for compensating angular deviations up to 4 degrees.

What is the significance of male and female components in a spherical washer?

When the male and female components nest, they swivel slightly to compensate for uneven surfaces & tolerance variations.

What is the advantage of compensating angular deviations?

Compensation of angular deviations creates a parallel plane between the inner face of the nut and the inner face of the bolt head. This allows uniform distribution of load over the complete inner contact surface area.

What is the nature of tolerance of the concave and convex components of these spherical washers?

The concave component has a positive tolerance while the convex part has a negative tolerance.

We are here to help!

Looking for a part not listed here?

Chat with us now

Explore More