-
Change Country
- Sign in
- Submit RFQ
Roof-mounted ventilators designed to exhaust odours and foul air from industrial and commercial complexes. Generally used for short or average resistance duct work. Available in belt-type and drive-type variants
Dayton upblast ventilators are centrifugal belt-drive ventilators to exhaust fumes, grease-laden vapours, foul air and odours out of working spaces, schools and warehouses. These upblast ventilators have an aluminum windband welded to the base to give them a virtually leakproof design. Dayton's upblast ventilators feature internal steel support braces and a fully rolled windband to improve the rigidity of the ventilators for transport & installation. Their motors, drive frames and wheels are isolated from the mounting base by neoprene studs for reducing the overall noise. The motor compartment is isolated from polluted air and is cooled from the outside air pulled inside by the spinning of the wheel. Dayton's direct driven upblast ventilators are equipped with electronically commutated motor (ECM) technology, a variable speed motor and a potentiometer dial pre-mounted on the motor to control the speed of the ventilator, allow up to 80 per cent useable turndown and remove the need for speed control. A wide range of these Dayton upblast ventilators is available on Raptor Supplies, an authorised Dayton distributor.
Belt drive Dayton upblast ventilators are suitable for whisking away fumes, foul air, grease-laden vapours, odours and potentially hazardous particles from schools, kitchen hoods and various commercial facilities. These centrifugal ventilators feature motor compartments that are isolated from contaminated air and are cooled by fresh air pulled from the outside. Hazardous location upblast ventilators feature spun aluminium housing with rolled wind band for increased stability, backward-inclined centrifugal wheels to minimise interference with airflow and spark-resistant aluminium rub rings to eliminate contact between fan shaft & housing. Severe duty upblast ventilators feature centrifugal wheels with special polyester powder non-stick coating for easier grease removal. The Dayton upblast ventilators without drive package feature a drive frame, blower wheel and motor that are completely base plate isolated using independent neoprene studs for metal-to-metal contact elimination and reduced overall noise. They also feature base welded aluminium windbands for leak proof seal between the mounting surface and the ventilator. Choose from a broad range of these Dayton centrifugal roof vents, available in roof and wall mounting variants on Raptor Supplies, an authorised Dayton distributor.
Dayton electric baseboard heaters are used for warming hallways, offices and small rooms. These baseboard heaters have rugged steel construction with multiple knockouts on each end for durability and built-in cable clamps for mechanical support and include wiring pigtails & installation mounting guides. Dayton hydronic electric baseboard heaters feature a liquid-filled element which provides temperature swing minimisation and continuous heat delivery even after being turned off. Raptor Supplies is an authorised distributor of Dayton electric baseboard heaters.
Electric ceiling heaters from Dayton are designed for use as central heating systems in concealed spaces without taking up wall or floor space. These heavy-duty heaters feature built-in T-bar suspension clips for mounting (enables easy installation) the panels to suspended ceilings. They have a built-in auto reset thermal cutout to allow automatic shut-off and prevent overheating hazards. Selected models feature adjustable direction airflow to customise airflow according to a heating purpose. Dayton electric heaters come in recessed and surface mounting designs to ensure efficient operation and easy mounting on the ceiling. They are equipped with an automatic fan delay switch to push the remaining cool air out of the duct system after the compressor is shut off. Raptor Supplies offers a wide variety of these electric ceiling heaters from Dayton in heating capacities up to 17100 BtuH at 277 VAC.
Dayton electric heaters are cETLus certified for use as auxiliary or intermittent heat sources and are installed in concealed & plenum spaces and areas not readily accessible. These heaters feature an energy-efficient fan coil design and a single- / three-phase, semi-enclosed motor to deliver airflow up to 1000 cfm at 480 VAC. They have a built-in auto reset thermal cutout to allow automatic shut off & prevent overheating and an automatic fan delay switch to push the remaining cool air out of the duct system after the compressor is shut off. Dayton electric fan coil heaters come with a single-point panel for easy access to all serviceable parts. Choose from a host of electric heaters from Dayton, available in heating capacities up to 51195 BtuH on Raptor Supplies.
Dayton electric utility heaters are used as an auxiliary heat source for garages, warehouses, stores, factories, basements, workshops and service stations. These heaters feature an automatic fan delay function which prevents exposure to residual heat for higher comfort level and come with ceiling mounting brackets offering vertical / horizontal flow mounting positions. They also have a built-in thermostat with a thermal cutout to allow automatic shut off and protect against overheating. We also offer Dayton freeze protection heaters (with NEMA 12 control box construction to keep out dust & moisture) designed specifically for water closets, crawl spaces and concealed areas. Choose from a wide variety of these electric utility heaters from Dayton, available in a maximum heating capacity of 17065 BtuH on Raptor Supplies.
Dayton electric heaters are used to provide the maximum heat (without using much energy) to waiting rooms, lobbies and other large spaces requiring additional heat. These heaters can easily be mounted to a wall or on a surface to save space and provide reliable heat output. Some models are equipped with a built-in thermostat to maintain a consistent temperature. For added safety, the heaters feature a built-in power disconnect switch and a red alarm light that will illuminate if the heater has turned off due to overheating and prevent damage due to excessive heat. A huge selection of these Dayton electric heaters is available on Raptor Supplies, an authorised distributor of the brand.
Portable electric heaters from Dayton are primarily designed for temporary heating of buildings under construction, alteration or repair and keeping offices and rooms warm & comfortable in cold weather. Also called space heaters, they circulate the air in the room to gradually and continuously heat the space. These heating units can be conveniently positioned where they're required to supplement heat from a central heating system. Operating as a supplement to the central heating system, these efficient & quiet-running heaters feature front & rear screens and a high limit temperature switch on selected models for added safety. A wide range of Dayton electric heaters including portable baseboard heaters, heated rubber mats, fan-forced space heaters, electric oscillating pedestal heaters & portable salamander heaters is offered by Raptor Supplies, the brand's authorised distributor.
Door louvers allow fresh air to move freely between rooms, offices or closets while maintaining privacy and security. Feature strong metal construction along with inverted V-style blades at 45 degree angle which allows maximum air to pass through. Available in clear anodized and grey paint finish
Dayton's product line includes heavy duty V-belts, gear belts, farm duty motors, washdown motors, AC / DC gearmotors, speed reducers & gear drives, transformers, ventilators, steel cables, web slings, shaft collars, relays, air circulars, shutters, blowers and drum pumps. Dayton gearmotors are used to adjust torque & speed and are ideal for use in peristaltic pumps, CNC machines and automotive applications. Dayton V-belt, one of the company's best-selling products, conforms to Rubber Manufacturers' Association (RMA) standards and is extensively used as a transmission belt. Dayton air curtain blowers are designed to produce a wall of continuously flowing air that provides a thermal barrier against outside air and prevents heated or cooled air from escaping through open doorways. High traffic areas can leave their doors open, keeping flying insects out & eliminating the hassle caused by automatic / manual doors opening and closing. They reduce humidity and loss of cold air. The brand also offers OEM blowers ideal for replacing worn-out motors on HVAC devices. The Dayton 1TDP6 blower feature cast aluminium end shields for heat dissipation and a dynamically balanced design for smooth and quiet operation. The motor on these blowers facilitate auto thermal protection to prevent overloads or phase failure.
All Dayton motors are provided with full fact nameplates having easy to read wiring diagrams. This reduces installation time and prevents miswiring.
General purpose motors are used for mechanical loads (eg: air movement) and hard to start applications such as conveyors, belt driven equipment, machine tools & reciprocating pumps. These motors have a rugged design and heavy duty ball bearings for handling large radial & axial loads. Specific purpose motors are intended for washdown / hazardous locations / pump duty. HVAC motors are designed for air movement and other light to medium duty applications, such as fans, centrifugal pumps, small tools & office equipment.
Yes, Dayton provides cleaning & janitorial supplies to keep commercial and industrial facilities clean and well maintained. They clean, degrease, sanitise and disinfect walls, floors & other surfaces. Cleaning supplies from Dayton include mops, brooms & floor cleaning machines that clean, scrub, strip, buff, polish or vacuum floors and carpets.
It may be possible to use a run capacitor as a start capacitor, however, the available values are much lower than those for dedicated start capacitors. To ensure that the run capacitor matches the original start capacitor specification, it must have the same capacitance rating and voltage rating.
Selecting the appropriate Dayton blower depends on the required airflow, static pressure, application environment and industry standards or regulations.
The top end of Dayton water tanks has an inlet / outlet for connecting the piping system to the water pump on the other end. The water tanks can be stored horizontally or vertically.
These floor scrubbers are available in 17 and 20 inch sizes.